The graph on the main website page of that matter should really convince you that Alliant 410 isn't the powder to implement with AA-HS hulls.



The balance is for powder. Because your crimp goes in the wad column/hull your powder is not really cumbersome adequate which lets the shot/wad column to set way too deep within the hull. Since you have severe restrictions with component availability while in the 410 gauge its in all probability essential to change powder as a way to solve the challenge.

Accurate Powders is a company that surely life around its name. The complete line of smokeless powders for handguns, rifles, and shotguns is engineered and lab-analyzed To maximise precision and functionality.

Dano523 mentioned: Only problem with not reaming the shot bushing to throw 226 of shot in a very HS hull with .296" powder bushing, will be the shot is going to rattle while in the shell (my version of the practice only load Should the shot rattles once you shake the spherical). Click to extend...

I employed the self indexing aspect around the 9000G without having issue and usually have. In case you spill any shot, you then could have issues.

And Sure, I've applied all a few powders, and could drop flats of these on stations in mixes, so you wouldn't have the ability to convey to which shell experienced what powder, Considering that the speeds and patterns are so shut with each other on the 1350fps vary, there is no viable distinction in general performance of your shells.




So 296/297 at 1200fps leaves a great deal of unburnt powder inside the bore, although the more quickly/higher Doing work stress loads true winds up with considerably less unburnt powder inside the bores have a peek at this web-site isntead.

I'm able to learn the facts here now validate from initially hand expertise the 13gr. load functions just like a charm using a load of three @ 0.395" balls; my loads have been plastic shells but I see no explanation why it would not do the job with total length metallic shells.

Now Then again, Should the hulls are HS, then the powder bushing you need can have an ID of .296" along with a goal bodyweight drop of 16.9grs, which must set the shell close to 1325fps, and that may pattern a hell of good deal a lot better than just one at 1200fps isntead.

As outlined, the crimps on both of those 28 gauge and .410 bore STS hulls will become unusuable following five or six reloads. If you can choose them up cost-free they're well worth making use of awhile but they're not worth paying out anything at all for.

3 grains. Same batch of boolits showed less strain with 410 in the course of Sept./Oct. I by no means experienced the chance to utilize it within the cold in the winter nevertheless. I in fact liked it much more than 2400 due to the fact I could squeak out extra velocity before top would set in...

Your rammer tube could be established as well lower. I have not loaded .410, but I think which the 30 lb. you need to move the indicator is too much to get a .410 wad. Try out ramming a wad Together with the clamp loose and find out Should the rammer tube moves up. If it does, test a crimp. If that's too high, lower and champ the tube about 50 % way.




The best ballistic specialists and high top quality components are brought alongside one another to ensure every single gun is best served with Accurate Powders.

Ibericafé stresses the importance of the product or service and the daily effort to make a personalized, price-based assistance for their purchasers by implementing deep expertise in both merchandise and market.